9101 Camp Bowie West |
Fort Worth,
TX
76116
SALES: (800) 244-5910| SERVICE: (800) 249-9475
Window Sticker
2020 Chevrolet Low Cab Forward 4500
Crew Cab
VIN
54DCDJ1B9LS803580
Transmission
Automatic
Trim
Work Truck
Color
Arc White
Pricing
Destination Charge$1,325.00
Installed Options
TIRES, FRONT, 225/70R19.5$26.64
PIO, Mirror, outside left hand and right hand heated$105.00
PIO, Mirror, provisions-bracket for 102" wide body$135.00
PIO, Remote Keyless Entry$315.00
PIO, Back up alarm$115.00
MSRP*$55,711.64
Low Cab Forward 4500 Standard Equipment**
Interior
Air conditioning, single-zone manual, integral in-dash mounted
Cruise control, electronic, automatic
Cup holders
Door locks, power
Driver Information Center
Floor mats
Lighting, interior dome
Seat trim, Cloth
Seat, front high back bucket driver and passenger tricoat cloth covered reclining highback driver seat with single two occupant fold down passenger seat (STD)
Steering column, Tilt-Wheel
Steering wheel, urethane
Storage, door pockets
Storage, seatback pockets
Windows, power
Windshield washer bottle access on passenger side dash when passenger-side door is open
Mechanical
Air cleaner, heavy-duty, 11" diameter dry paper single element. Air cleaner canister standard with air restriction gauge. Back of cab location.
Alternator, 145 amps output with integral regulator
Brakes, 4-wheel antilock, front disc, rear drum, dual circuit, vacuum assisted hydraulic with EBD (Electronic Brake Distribution). Disc front and self-adjust outboard mounted drum rear. Mechanical, transmission-mounted parking brake. Non-asbestos semi-metallic linings are standard. 4 channel anti-lock brake system.
Drivetrain, rear-wheel drive
Emissions, 50 state certification
Engine, 6.6L V8 SIDI, GMPT-V8 8 cylinder V Iron block, four cycle overhead valve water cooled 6.6L SIDI V8 350 hp [261 kW] @ 4500 rpm, 425 lb.-ft of torque [575.8 N-m] @ 3800 rpm. Electronically controlled direct fuel injection. Six bolt main cap design for heavy-duty performance. Engine Control Module (ECM) and Transmission Control Module (TCM) engine control system. Engine cruise control, engine oil cooler, High Idle Mode (1200 rpm).
Exhaust, single outlet
Frame, ladder-type channel frame. Full C section straight frame 33.5" (85.1 cm) wide. Yield strength 44,000 psi, section modulus 7.20 cu.in. and RBM 316,800 lb-ft/in per rail.
Front axle, 6,830 lbs. (3098 kg), reverse Elliot "I"-beam includes integral hydraulic power steering. ratio 18.8-20.9:1
Front suspension, 8,440 lbs. (3828 kg) tapered leaf, semi-elliptical steel alloy tapered leaf springs. Includes shock absorbers and stabilizer bar.
Fuel tank, 38.6 Gallon, (146L), rectangular fuel tank. mounted between frame rail with electric type fuel pump (mounted in tank). Through the rail fuel fill. (Not available with (L96) Vortec 6.0L V8 SFI engine.)
GVWR, 14,500 lbs. (6577 kg)
Incomplete vehicle certification
Rear axle, 11,020 lbs. (4998 kg) R050, full-floating single-speed with oil lubricated rear wheel-bearings